Posts Tagged ‘Android’

Android INSTALL_FAILED_CONTAINER_ERROR on installing an application

28 April 2012 4 comments

I got this error while I rebooted my android device in the middle of installing an application (it was taking ages so I assumed that it was stuck). It seems that android did not have time to clean the file system, so every time i was trying to install an application I was getting the error:

ASEC file ‘/mnt/secure/asec/smdl2tmp1.asec’ currently exists – destroy it first! (Address already in use)

The solution to this is actually very simple. Make sure that you have connected your device to your computer and that it’s running on debug mode (it’s not mounted). Open a command window, go to your Android\android-sdk\platform-tools and type adb shell. This should open the adb shell and connect as root. Then simply type rm /mnt/secure/asec/smdl2tmp1.asec and the problem should go away.


Categories: Android Tags: , ,


21 April 2012 3 comments

Lately I have started doing some Android development. I have written a small application called “Lexicon” which you can find on Google Play. It works with Android version 2.2 and above. It’s a dictionary which you can use from any application that has “share text” capabilities. I’d appreciate if you can download it (it’s free) and test it on your device (I have only tested it with Android 2.2 and 2.3). If you do download it please read the release notes. Please let me know of any bugs or errors you find.

Thank you.

Categories: Android Tags: , ,

How to debug your Android application on an Archos 7 internet tablet

27 February 2012 2 comments

You can find information on how to debug on a real device on the Using Hardware Devices page. But since this is missing information about the Archos Internet Table 7 (the device I am using) I will post here how you can do it (on Windows).

First of all you need to download the Archos ADB drivers from the archos site. Install it by following the instructions on the Google USB Driver page.

Then you need to edit the adb_usb.ini file (it should be in your home directory, under the .android folder) and add the following line: 0x0e79. You should get something like the following:

# USE 'android update adb' TO GENERATE.

You must kill and restart the adb server by running: adb kill-server and adb start-server (adb is in android-sdk\platform-tools). You can also run adb devices to make sure your device is listed. You should see something like the following:

List of devices attached
A70-3A860001-9FF80000-015DB7D4-???????? device

(the ?????? is probably a name in non-Latin characters that the command window does not recognise).

Once you’ve set it up configure your application and your device to be debugable by following the instructions on the Using Hardware Devices page.

If you have done everything correctly next time you run Eclipse you should see that it’s synchronising the application to your device

[2012-02-27 19:44:16 - Lexicon] Performing sync
[2012-02-27 19:44:16 - Lexicon] Automatic Target Mode: using device 'A70-3A860001-9FF80000-015DB7D4-????????'
[2012-02-27 19:44:16 - Lexicon] Uploading TestApp.apk onto device 'A70-3A860001-9FF80000-015DB7D4-????????'
[2012-02-27 19:44:17 - Lexicon] Installing TestApp.apk...
[2012-02-27 19:44:25 - Lexicon] Success!
[2012-02-27 19:44:26 - Lexicon] \TestApp\bin\TestApp.apk installed on device
[2012-02-27 19:44:26 - Lexicon] Done!

You are ready to start debugging your application on a real android device.

Categories: Android Tags: , , ,